Products Shopping Services MSDS Instructions Training Login Forms

HTHP Filter Press, 500 mL

#171-00-C: 115-Volt

#171-01-C: 230-Volt

HTHP Filter Press, 500 mL

Introduction:

The OFITE HTHP (High Temperature, High Pressure) Filter Press is designed for testing drilling fluids and cement under elevated temperatures and pressures. The unit simulates various downhole conditions and provides a reliable method for determining the effectiveness of the material being tested.

The complete assembly consists of the following:

  • A controlled Nitrogen pressure source (not included)
  • A pressure manifold with two regulators (primary and back pressure)
  • A high-pressure test cell
  • A heating jacket for heating the test cell
  • A suitable stand

The components of the OFITE HTHP filter presses are fully interchangeable with those marketed by other manufacturers. The 171-00 series HTHP Filter Press is equipped with a 500 mL sample cell and four 200-watt heaters for temperatures above 350°F (176°C), making it ideal for laboratory use. Also included is a regulator manifold system for connecting to bottled nitrogen for higher pressures (up to 2,000 PSI / 13,880 kPa). All HTHP units may be ordered with 115 Volt or 230 Volt power requirements. A wide variety of accessories and replacement parts are also available.

Specifications:

  • Maximum Temperature: 500°F (260°C)
  • Maximum Pressure: 2,000 PSI (13,880 kPa)
  • Pressure Source: Nitrogen (at least 1,500 PSI / 10,343 kPa)
  • Test Cell Capacity: 500 mL
  • Voltage: #171-00-C: 115V; #171-01-C: 230V
  • Heater: 800 Watt

Dimensions:

Size: 10" × 18" × 42" (25 × 46 × 107 cm)
Weight: 53 lb (42.1 kg)

Shipping Size: 29" × 12" × 16" (74 × 30.5 × 41 cm)
Shipping Weight: 65 lb (29.5 kg)

Diagram

Instructional Videos

Instructional videos are available when you have purchased and registered your equipment. To request access, click here and complete the form. If you already have a login and password, click here.

  • Components:

  • 171-00-C HTHP FILTER PRESS, 500ML; SINGLE CAPPED CELL, 2000 PSI; COMPLETE WITH DUAL NITROGEN MANIFOLD AND 100 ML BACK PRESSURE RECEIVER; 115 VOLTS
  • 171-01-C HTHP FILTER PRESS 500ML; SINGLE CAPPED CELL 2000 PSI; COMPLETE WITH DUAL NITROGEN MANIFOLD AND 100 ML BACK PRESSURE RECEIVER, 230 VOLTS
  • Optional:

  • 143-07 REPAIR KIT FOR #143-00 & 170-08 REGULATORS
  • 170-37 NITROGEN CYLINDER; 21 INCH X 7 INCH ; RIGHT HAND THREAD
  • 171-00-C-SP SPARE PARTS FOR ONE YEARS OPERATION 500 ML HTHP FILTER PRESS, 115 VOLT
  • 171-01-C-SP SPARE PARTS FOR ONE YEARS OPERATION 500 ML HTHP FILTER PRESS, 230 VOLT
  • 171-06SAFETY SHIELD

For more information about this product or to request a quote, contact us.