| Item: |
140-75 |
| Description: |
Bench
Mount Filter Press with Dead Weight Hydraulic Assembly |
The Dead Weight Hydraulic Assembly provides the operator of a standard API Filter Press with a convenient source of hydraulic pressure. This alleviates the need for a regulator, separate pressure source, or outside connections. The assembly is composed of a water reservoir that requires a pint of fresh water for each test, a piston and cylinder, a dead weight gauge, two check valves, and a bleed-off valve. When the system is closed, the dead weight causes the piston to exert a continuous pressure of 100 psi against the fluid inside the filter press cell. Pressure on the cell is released promptly at the completion of the test with a bleed-off valve. The hydraulic system has sufficient volume to run the complete 30-minute filtration test without further attention from the operator, and the assembly requires a minimum amount of maintenance.
Size: 9 x 10 x 19 inches (22.9 x 25.4 x 48.3 cm)
Weight: 37 lbs (16.8 kg)
Components:
#140-20 API Bench Mount Filter Press - Basic
#140-55 Filter Paper, 3 1/2" (8.9 cm), 100/pkg
#140-70 Dead Weight Hydraulic Assembly
#140-71 O-Ring
#141-13 Air Hose, Low Pressure, 15"
#143-01 Gauge, 200 psi, 1/8" Bottom Connection
#144-14 Hex Nipple, Plated, 1/8" x 1/8"
#153-16 Graduated Cylinder, Glass, 25 ml x 2/10 ml
Optional:
#140-75-SP
One Year’s Spare Parts for 140-75
|
