| Item: |
170-50 |
| Descripcion: |
Dynamic
HTHP Filter Press, 115 Volt |
The OFITE Dynamic High Temperature High
Pressure (HTHP) filter press measures filtration properties under varying dynamic downhole conditions. A motor-driven shaft fitted with propellers turns at varying speeds inside a standard 500 ml
HTHP cell. RPM settings from 1 to 1600 RPM impart laminar or turbulent flow to the fluid inside the cell. By varying the shaft length, the shear stress may be increased or decreased. The power is driven to the stirring shaft by a timing belt that is easily accessible for quick adjustment and removal. Other features include a variable-speed motor controlled through an SCR controller. RPM is indicated on a digital tachometer. The test procedure is exactly the same as that in the conventional
HTHP filtration test. The only difference is the fluid is circulating inside the cell while filtrate is being collected. Since the filter medium is conventional disk material, the results are fully comparable with those of other laboratories or for comparing historical trends.
Features of the Dynamic Filter Press Include:
- Analyzes fluid in motion
- Variable-speed electric motor, 1/2 HP permanent magnet DC
- Auxiliary pipe connection for the cell top cap. Plug may be removed to add additional fluid additives.
- Safety calibrated rupture disk to guard against overpressure
- Motor and stirring shaft rpm operate at a one-to-one ratio
- Adjustable thermostat from 100 to 500°F
- Optional filter permeabilities available
- 500 ml capacity stainless steel cell
- Optional carrying case
Tamaņo: 12 x 15.5 x 36 plg (30.5 x 39.4 x 91.4 cm)
Peso: 95 lbs (43.1 kg)
|
