|
Productos
Aguas
Residuales
Cementacion
Ensayos
de Testigos
Estimulacion
Laboratorios
Moviles
Lodos
de Perforacion
Agitadores
Annilos
de Corrosion
Balanzas
Batidores
Centrifuga
Copas
Termicas
Ensayo
de Lutita
Envejecimiento
Estabilidad
Electrica
Filtros
Prensa
Hidrometros
Higrometros
Hornos
de Rolado
Kits,
Portable
Medidor-Pegamiento
Medidores
de pH
Medidores-Lubricidad
Mezcladores
Reguladores
Resistividad
Retortas
Viscosimetros
Novedades
Perfil
de Inyeccion
Provisiones
Reacondicionado
Reactivos
Restauracion
Terminaciones
Servicios
MSDS
Instrucciones
Noticias
Registracion
Formularios
|
 |
| Item: |
171-90 |
| Descripcion: |
Permeability
Plugging Tester (PPT), 2000 psi, 115 Volt |
The Permeability Plugging Tester (PPT), is a modification of the 500 ml high pressure, high temperature filter press. The instrument is used for making filtration tests on plugging materials without the interference of particle settling on the filter medium. Typical differential pressures are much higher than those seen in standard
HTHP filtration testing. The pressure cell is the same as that used on the
HTHP Filter Press, but it is inverted with the filter and receiver on top. Several filter mediums may be used, such as 1/4" thick fused aluminum oxide disks, conventional filter paper, or sintered metal filters. The cell is pressurized with hydraulic oil (#171-96-1). A floating piston separates the oil from the test fluid within the pressurized cell. The conventional cell may be operated to 2000 psi by using hardened steel set screws to secure the end caps. For elevated pressures, OFITE has designed a special cell with a working pressure of up to 4000 psi, pressurized with the conventional hydraulic pump.
Tamaņo: 15 x 25 x 42 plg (38.1 x 63.5 x 106.7 cm)
Peso: 58 lbs (26.3 kg)
|
|
Para
preguntas o informacion de ventas,
envienos
un e-mail a nuestra direccion general: sales@ofite.com
|
|
|
