OFITE - Filter Presses

Filter Presses

The OFITE low pressure filter press design features a cell body to hold the mud sample, a pressure inlet, and a base cap with screen and filter paper. Suitable for field and laboratory use, these units have become the industry standard for low pressure/low temperature filtration testing.

OFITE also manufactures other types of filter press units and inventories a full line of replacement and consumable parts. Stainless steel cases are available for most of the units. When several tests must be run simultaneously, as in a laboratory environment, multi-units are available in either two, four, or six- cell designs. These multi-units come complete with manifolds and all necessary air hoses and bleed-off valves. The field portable units are supplied with various pressurization assemblies and manifolds and rely mainly on carbon dioxide bulbs and nitrogen gas to provide pressure. The American Petroleum Institute (API) recommends a standard 100 ± 1.0 psi (690 ± 6.9 kPa) cell pressure be applied within 30 seconds for a 30 minute test.

When high pressure and high temperature filtration measurements are required, HTHP filter presses designed specifically for simulating down-hole conditions are recommended. Test temperatures for all models may exceed 200°F (93°C), provided a back-pressure receiver is used to collect the filtrate. The components of the OFITE HTHP filter presses are fully interchangeable with those marketed by other manufacturers. Three different sizes are available to accommodate different requirements and preferences. The No. 170-00 series is a field portable unit with a 175 ml sample cell and a small power consumption consisting of two 200 Watt heaters. The test cell is encased in the heating jacket to ensure complete and uniform sample heating. Normally CO₂ bulbs are used to pressurize both the cell and back pressure receiver, however other pressurization options are available. The Model MB HTHP filter press (No. 171-50) features quick connect couplings for pressurization. It is also portable and may be ordered with a stainless steel case (No. 171-81). The 175 ml and the Model MB style filter presses are designed for test temperatures up to 350°F (176°C). The No. 171-00 series is equipped with a 500 ml sample cell and four 200 Watt heaters for temperatures above 350°F (176°C) making it ideal for laboratory use. Also included is a regulator manifold system for connecting to bottled nitrogen for higher pressures. All HTHP units may be ordered with 115 Volt or 230 Volt power requirements. A multi-unit laboratory model is available and may be custom designed to your specifications. A wide variety of accessories and replacement parts are also available.

Low Pressure

140-00

Wall Mount Filter Press - Basic

140-10

Wall Mount Filter Press with CO₂ Pressure Assembly

140-20

Bench Mount Filter Press - Basic

140-30

Bench Mount Filter Press with CO₂ Pressure Assembly

140-31

Bench Mount Filter Press with Regulator (143-00) and Hose

140-35

Bench Mount Filter Press with Nitrogen Manifold and Cylinder

140-40

4-Unit Laboratory Model Filter Press

140-41

4-Unit Filter Press, Model 12BL-4

140-42

6-Unit Filter Press, Model 12BL-6

140-43

2-Unit Filter Press, Model 12BL-2

140-50

6-Unit Laboratory Model Filter Press

140-60

Complete Half Area Filter Press

140-75

Bench Mount Filter Press with Dead Weight Hydraulic Assembly

140-80

“Filter Rite” Low Pressure Filter Press

142-53

Model MB Filter Press with CO₂ Assembly

144-10

Wall Mount Filter Press in Stainless Steel Case

162-71

Kit Sized Full Area Filter Press with “Stabilizer” Regulator

HTHP

170-00

Complete HTHP Filter Press, 175 ml, 1500 psi, 115 Volt, 400 Watt

170-00-3

HTHP Filter Press w/Single Capped Cell, N2, 175 ml, 115 Volt

170-00-4

4-Unit HTHP Filter Press

170-01

Complete HTHP Filter Press, 175 ml, 1500 psi, 230 Volt, 400 Watt

170-01-3

HTHP Filter Press w/Single Capped Cell, N2, 175 ml, 230 Volt

170-50

Dynamic HTHP Filter Press, 115 Volt

170-50-1

Dynamic HTHP Filter Press, 230 Volt

171-00-C

Complete HTHP Filter Press, 500 ml, 2000 psi, 115 Volt, 800 Watt

171-01-C

Complete HTHP Filter Press, 500 ml, 2000 psi, 230 Volt, 800 Watt

171-50

Complete Model MB HTHP Filter Press, 1500 psi, 115 Volt

171-50-4

Model MB 4-Unit HTHP Filter Press, 115 Volt

171-51

Complete Model MB HTHP Filter Press, 1500 psi, 230 Volt

Cement

170-00-2

HTHP Filter Press for Cement Testing, 175 ml, 2000 psi, Double Capped Cell,
N₂ Manifold, 115 Volt

170-01-2

HTHP Filter Press for Cement Testing, 175 ml, 2000 psi, Double Capped Cell,
N₂ Manifold, 230 Volt

170-00-5

HTHP Filter Press 175 ml, Double End, CO₂, 115 Volt

170-01-5

HTHP Filter Press 175 ml, Double End, CO₂, 230 Volt

171-03

HTHP Filter Press for Cement Testing, 500 ml, 2000 psi, Double Capped Cell,
N₂ Manifold, 115 Volt

171-04

HTHP Filter Press for Cement Testing, 500 ml, 2000 psi, Double Capped Cell,
N₂ Manifold, 230 Volt

Permeability Plugging Tester

171-84

Permeability Plugging Tester (PPT), 4000 psi, 115 Volt

171-84-01

Permeability Plugging Tester (PPT), 4000 psi, 230 Volt

171-90

Permeability Plugging Tester (PPT), 2000 psi, 115 Volt

Accessories
	170-33	Cell Cap Removal Tool
	170-40	Carrying Tool for HTHP Cell
	171-23	TC Safety Pin with Laynard

Accessories

Para preguntas o informacion sobre ventas,

envienos un e-mail a sales@ofite.com