| Item: |
162-60-1 |
| Description: |
Oil
Mud Laboratory with Stainless Steel Case, 230 V |
Oil mud emulsions are used to reduce filtration loss, alleviate sticky hole problems, improve drilling rate, and increase drill bit life. With oil muds, soft sticky gumbo shales may be drilled without washing out or caving into the
wellbore, and producing formations with clay within their pore spaces will not be as affected by swelling, which impairs permeability. Some reservoirs that will not produce when drilled with water-based mud will become commercially viable when drilled and completed with oil-based mud. Oil muds are also routinely used for drilling horizontal holes because of the lubricating properties they possess.
The OFITE Oil Mud Laboratory retort analysis is a standard guide for controlling the oil/water ratio, which influences the viscosity and filtration of the oil mud. Labware and reagents are included for
de-emulsification and for the determination of the aniline point, alkalinity, calcium, and chloride content.
Everything is housed in a convenient newly modified stainless steel cabinet with lots of storage space and shelving for ease of usage.
Size: 26 x 13 x 10 inches (66 x 33 x 25.4 cm)
Weight: 68 lbs (30.9 kg)
Components:
#131-50 Emulsion Stability (ES) Tester, OFITE Sine Wave
#165-10 Removable Retort, 10 ml, 230 Volt
#130-10 Viscometer, OFITE Model 800 8-Speed
#130-10-30 Power Supply, 230-110-12 Volt, for Model 800
#130-38-1 OFITE Thermocup, 230 Volt
#166-03 Pocket Balance, Battery, 0-320 grams
#167-00 Sand Content Kit
Labware:
#110-30 Measuring Cup, Stainless Steel, 500 ml
#145-83 Clamp, Fiberglassｮ Sleeve
#152-49 Stirrer Hotplate, 230 Volt
#152-48-1 Support Rod for Stirrer, 1/2" x 12"
#153-03 Brush for Graduated Cylinder, 1/2" x 8"
#153-06 Brush for 10 ml Receiver Tube
#153-15-1 Test Tube, Glass, 20 x 1.2 x 150 mm
#153-15-2 Test Tube, Glass, 41 x 2 x 150 mm
#153-16 Graduated Cylinder, Glass, 25 ml x 2/10 ml
#153-18 Graduated Cylinder, Glass, 10 ml x 2/10 ml
#153-29 Syringe, Glass-Tip, 2 ml
#153-29-2 Syringe, Glass-Tip, 10 ml
#153-31-1 Wash Bottle, 250 ml
#153-34 Pipette, Glass, 1 ml x 1/100 ml
#153-38 Pipette, Glass, 5 ml x 1/10 ml
#153-40 Pipette, Glass, 10 ml x 1/10 ml
#153-42 Pipette Filler, Rapid Release, 10 ml Capacity
#153-51-2 Beaker, Glass, 600 ml
#153-51-3 Beaker, Glass, 50 ml
#153-53-1 Stir Bar, 1" x 5/16"
#153-53-11 Stir Bar, 1/2" x 5/16"
#153-88 Cork for Thermometer, Size 8
#153-89 Cork for Test Tubes, Size 20
#154-26 Thermometer, Aniline Point, 77 to 221ｰF
#154-50 Spatula, 4"
#165-05 Receiver Tube for Retort, Glass, 10 ml, 100%
#165-34 Spatula for 10 ml Retort
#165-41 Corkscrew
#165-42 Steel Wool, Package
#165-43 Pipe Cleaner
#165-44 Never Seezｮ High Temp. Thread Lubricant
#165-62 Syringe Filter, PTFE, 25 mm, 0.45 um
Reagents:
#130-78-25 Heating Bath Oil, 16 oz (500 ml)
#131-16 Aerosol Sol地, 1/2 oz (15 ml)
#145-84 *Aniline Sol地, 8 oz (250 ml) UN1547
#205-14-4 *Calcium Buffer Sol地, 16 oz (500 ml) UN1824
#205-17-2 Titration Sol地 (EDTA), 4000 mg/L, 8 oz (250 ml)
#206-01 Deionized Water, 8 oz (250 ml)
#210-00-1 Calver IIｮ Indicator Powder, 100 gram
#215-00 Potassium Chromate Sol地, 2 oz (60 ml)
#215-02 Potassium Chromate Sol地, 8 oz (250 ml)
#220-00 Phenolphthalein Indicator Sol地, 2 oz (60 ml)
#220-01 Phenolphthalein Indicator Sol地, 8 oz (250 ml)
#230-10 *Sulfuric Acid, 0.1N, 8 oz (250 ml) UN2796
#265-08 Silver Nitrate Sol地, 0.01G, 16 oz (500 ml)
#280-25 *Xylene-Isopropyl Alcohol 1:1 Mix, 1 Gal (3.785 L) UN1993
#285-06 Calcium Sulfate, Anhydrous, 58 g
Case:
#141-17 Clip for Graduated Cylinder
#162-61 Case, Stainless Steel
#163-26 Clip, Small
#163-27 Clip, Medium
#163-28 Clip, Large
Optional:
#152-60-1 Waring Blender with Glass Container, 230 V
#153-59 Hygromaster Thermo-Hygrometer
#162-60-1-SP
One Year痴 Spare Parts for 162-60-1
|
