|
Products
Cementing
Completions
Core Testing
Drilling Fluids
Aging
Cells
Balances
Blenders
Centrifuge
Corrosion
Rings
CST
Electrical
Stability
Filter
Presses
Hydrometers
Hygrometers
Kits,
Portable
Lubricity
Testers
Mixers
Ovens,
Roller
pH
Meters
Regulators
Resistivity
Retorts
Shale
Testing
Sticking
Tester
Stirrers
Thermocups
Viscometers
Lab Housing
Mud
Logging
Reagents
Reconditioned
Restaurant
Software
Stimulation/Frac
Supplies
Wastewater
What's New Shopping
Services
MSDS
Instructions
News
Login
Forms
Order
Form
Credit
Application
|
| Thermocups
and Cup Heaters |
Thermocups and cup heaters are designed for controlling the temperature of a mud sample while taking readings with a rheometer or viscometer. Normal heat-up time is 15 minutes and the pilot light turns on when the well reaches the set temperature. Drilling fluid has a low thermal conductivity, so it must be agitated in order to reach a uniform temperature within a reasonable length of time. For safety considerations, the fluid should never be heated above 200°F (93°C). The rotor and bob should not be immersed for long periods in the fluid as vapors will rise up into the bearings and condense, causing corrosion. The holes in the
stage of the OFITE Viscometers have been positioned to hold the heated cups at a 45° angle to the line of the instrument for better accommodation of thermometers and power cables.
| Thermocups
and Cup
Heaters |
 |
130-15 |
Double
Walled Circulating Cup |
 |
130-20 |
Cup
Heater with Stainless Steel Cup, 115 Volt, AC-DC |
| |
130-30 |
Cup
Heater with Stainless Steel Cup, 230 Volt, AC-DC |
 |
130-38 |
Thermocup, 115 Volt |
| |
130-38-1 |
Thermocup, 230 Volt |
 |
130-38-4 |
Thermocup
w/Removable Stainless Steel Cup, 115 V |
| |
130-38-6 |
Thermocup
w/Removable Stainless Steel Cup, 230 V |
 |
130-38-20 |
TC Thermocup, 115 Volt
|
|
130-38-25 |
TC Thermocup, 230 Volt
|
 |
152-55 |
Caron
Model 2050W Refrigerated &
Heated Bath/Circulator, 230
Volt, 50/60 Hz
|
|
|
|
|
