|
Products
Cementing
Completions
Core Testing
Drilling Fluids
Aging
Cells
Balances
Blenders
Centrifuge
Corrosion
Rings
CST
Electrical
Stability
Filter
Presses
Hydrometers
Hygrometers
Kits,
Portable
Lubricity
Testers
Mixers
Ovens,
Roller
pH
Meters
Regulators
Resistivity
Retorts
Shale
Testing
Sticking
Tester
Stirrers
Thermocups
Viscometers
Lab Housing
Mud
Logging
Reagents
Reconditioned
Restaurant
Software
Stimulation/Frac
Supplies
Wastewater
What's New Shopping
Services
MSDS
Instructions
News
Login
Forms
Order
Form
Credit
Application
|
 |
| Item: |
130-98 |
| Description: |
2-Speed
Viscometer, Reconditioned |
General Components:
#130-41 Sample Cup, Poly
#130-42 Power Cord, 12 Volt (10572)
#130-47 Connector, Female Plug (32985)
#130-54 Sample Cup, Stainless Steel (optional)
#134-06 Motor, 12-Volt AC-DC (30947)
#134-09-2 Overlay Dial (31497)
#134-10 Torsion Spring Assembly, F1 (30752)
#134-11 Gear Key (30804)
#134-15 Bob, B1, 303 Stainless Steel, Hollow (30844)
#134-16 Rotor Sleeve, R1, Chrome Plated Brass (30847)
#134-17 Splash Guard (30887)
#134-25 Steel Ball, 1/8" (31271)
#134-31 Omite Resistor, 4 OHMS (32321)
#134-32 On-Off Switch for Model 34 (32917)
#134-34 High-Speed Switch (32996)
#134-35 Bulb (33076)
#134-36 Knob, Red (30821)
#134-38 Bushing (30734)
#134-39 Clamp Sleeve for Torsion Spring (30986)
#134-40 Shim, 5/8" x 3/8" (31275)
#134-41 Gel Knob (30983)
#134-44 Dust Cap (30973)
#134-45 Zeroing Sleeve (30985)
#134-52 Insert Clutch (30916)
#134-53 Bearing Shield (30912)
#134-57 Plug Screw (30999)
#134-60 Pointer (30862)
#134-64 Spring Bushing (30924)
#134-66 Detent Spring (30987)
#134-67 Gear Shaft (30970)
#134-68 Support Tube Plug (30192)
#134-69 Rod Bushing, L.H. (30982)
#134-70 Rod Clamp Bushing (30996)
#134-72 Support Tube (Leg) (30191)
#134-73 Support Rod Stop (30189)
#134-74 Clamp Spacer for Locking Screw (30979)
#134-75 Clamp Nut for Leg (30978)
#134-76 Base (30861)
#135-00 External Retainer Ring for Main Shaft (30027)
#135-01 Internal Retainer Ring (35146)
#135-02 Bearing Retainer Lock Ring (31397)
#135-05 Bushing
#135-07 Thrust Washer, Nylon
#135-09 Washer, 3/16" (30715)
#135-12 Lens (30975)
#135-17 Switch Plate (32918)
#135-30 Temperature Warning Tag (31974)
#135-41 Nameplate, 12-Volt AC-DC
#135-42 Spring Counter Balance for Leg (30981)
#135-43 Base for Indicator Lamp (33062)
#135-44 Lens for Lamp (33063)
#135-45 Capacitor, 1.0 MFD (32477)
#171-44 Rubber Foot, 3/4"
Bearings:
#134-01 Upper Bearing (30922)
#134-02 Rear Bearing (30713)
#134-03 Lower Bearing (30923)
#134-04 Main Shaft Bearing (30729)
#134-05 Bob Shaft Bearing, Shielded
Gears:
#134-13 Center Shaft and Gear (30829)
#134-14 Center Shaft and Gear Assembly (30830)
#134-18 Change Gear (30913)
#134-19 Upper Change Gear (30914)
#134-20 Cluster Gear (30921)
#134-22 Idler Cluster Gear (30933)
#134-50-06 Main Shaft Gear (30995)
Screws & Pins:
#135-14 Roll Pin, 3/32" x 3/8" (30722)
#135-15 Roll Pin for Main Shaft, 1/16" x 3/16" (30873)
#135-18 Socket Set Screw for Clamp Sleeve (31025)
#135-19 Socket Set Screw for Spring Bushing (31267)
#135-20 Socket Set Screw for Knob (30137)
#135-21 Cover Screw (31017)
#135-23 Upper Cap Screw (31022)
#135-26 Stop Screw for Shift Rod (30779)
#135-37 Cap Screw (31046)
#135-38 Screw for Motor Mount (30782)
#142-63 Locking Screw (30977)
Shafts & Rods:
#134-09 Bob Shaft (30719)
#134-12 Shift Rod (30822)
#134-29 Main Shaft Assembly (31775)
#134-71 Support Rod (Leg) (30190)
Optional:
#130-43 Power Pak for 12-Volt Models, 230/115 to 12 V
|
|
