|
Наши
продукты
Цементация
Заключение
скважин
Исследования
керна
Буровые
растворы
Контейнеры
для старения
бурового
раствора
Весы
Миксеры
(Blenders)
Центрефуги
Коррозийные
кольца
Фильтры-прессы
Гидрометер,
водоопределитель
Гидрометер,
влагоопределители
Портативные
наборы
Анализатор
смазочных
материалов
Миксеры
(Mixers)
Вальцовые,
роликовые
печи
pH
Регуляторы
Измерители
сопротивления
Реторты
Анализ
сланцев
Приборы
по определению расвора
на прихват
Мешалки
Термостаканы
Вискозиметры
Модульные
лаборатории
Реагенты
Интенсификации
скважин
Расходуемые
материалы
Сточные
воды
Последние
разработки
Купить
Сервис
Материалы
по технике безопасности
Инструкции
Новости
Войти
Бланки,
анкеты
|
 |
| Вид товара: |
130-77 |
| Описание: |
HTHP Viscometer |
When extremely high temperature and/or high
pressure viscosity measurements are required, OFITE is pleased to
introduce its new HTHP Viscometer. This fully-automated system
accurately determines the rheological properties of completion fluids and
drilling fluids in terms of shear stress, shear rate, time, and
temperature at pressures up to 30,000 psi and temperatures up to 500°F.
An optional Chiller is available for those situations in which the fluid
sample needs to be cooled, rather than heated, further increasing the
flexibility of the system.
By allowing you to completely pre-program your settings using our
exclusive ORCADA™ software, the user can start the test and move on to
the next task at hand, increasing productivity. In addition, automatic
control over temperature, speed, and pressure, increases the reliability
of your data and enhances consistency between tests.
Designed with the end-user in mind, OFITE’s HTHP Viscometer is easy
to set up, use, and maintain. Users will appreciate the familiarity of the
ORCADA™ software, shortening the learning curve. A “modular” design
helps the user become more proficient in performing simple maintenance
procedures, vastly decreasing downtime.
Features/Specifications:
High Pressure - up to 30000 psi (206850 kPa).
High Temperature - up to 500°F (260°C). An optional chiller can be used
for testing to 32°F (0°C).
Versatile - 115 or 230-volt power sources.
Real Oilfield Geometry - uses traditional oil field Bob and Rotor for
measurements that are easy-to-use.
Computer-Controlled - uses OFITE’s exclusive ORCADA™ software.
Motor Speeds (rpm) - Variable speed range 0.01-600
Shear Rate Range (sec-1) - 0.01-1022
Viscosity Range - 0-300 centipoise at 300 rpm
|
|
