Products Shopping Services MSDS Instructions Training Login Forms

Labware

Beakers
#153-51-3 50 mL, Glass
#153-51-4 100 mL, Glass
#153-51-8 150 mL, Glass
#153-51 250 mL, Glass
#153-51-1 400 mL, Glass
#130-41 Nalgene®, 400 mL, Polypropylene
#153-51-2 600 mL, Glass
#130-55 Nalgene®, 600 mL, Polypropylene
#166-08-1 600 mL, Stainless Steel
#153-51-5 1,000 mL, Glass
#153-51-6 1,000 mL, Polypropylene
#153-51-7 2,000 mL, Glass
#120-910-054 2,000 mL, Plastic
Top

Brushes
#153-01 Brush, Bottle, Wood Handle, 3" × 12"
#153-05 Brush, Mini, 7½" × 3" Curved, Stainless Steel
#153-00 Brush for Centrifuge and Sand Content Tubes
#153-02 Brush for Graduated Cylinder, 1½" × 10¾"
#153-03 Brush for Graduated Cylinder or Pipette, ½" × 8"
#153-04 Brush for Pipette, 10 mL, ½" × 3" Bristles, 24", Wire
#153-06 Brush for Receiver Tube, 10 mL
#153-07 Brush for Receiver Tube, 20 mL
#153-08 Brush for Receiver Tube, 50 mL
#153-05-1 Brush for Retort Chamber, 1" Diameter, Stainless Steel
Top

Centrifuge Tubes
#153-19 12 cm, Glass
0 - 15 mL 0.1 mL
#153-21 Tube, Kolmer, 10 mL, Glass, 12.5 cm
0 - 2 mL 0.1 mL
2 - 10 mL 0.2 mL
#153-22 12.5 mL, API, 100%, Glass, 12 cm
0 - 3% 0.2%
3 - 10% 0.5%
10 - 50% 1.0%
50 - 100% 50%
#153-23 100 mL, ASTM
0 - 2 mL 0.2 mL
2 - 10 mL 1.0 mL
10 - 25 mL 5.0 mL
25 - 100 mL 50 mL
#153-24 100 mL, Pear Shaped, Glass Stoppered
0 - 0.2 mL 0.01 mL
0.2 - 100 mL 25 mL, 50 mL, 100 mL
#153-25-20 100 mL, Short Cone, for Oil
0.0 - 0.5 mL 0.05 mL
0.5 - 2.0 mL 0.1 mL
2.0 - 3.0 mL 0.2 mL
3.0 - 5.0 mL 0.5 mL
5.0 - 10.0 mL 1.0 mL
10.0 - 25.0 mL 5.0 mL
25.0 - 100.0 mL 25.0 mL
Top

Flasks, Erlenmeyer
Part # Capacity (mL) Subdivisionis (mL) Stopper
#153-50-4 25 5 0
#153-50-3 50 10 1
#153-50-1 125 25 5
#153-50 250 25 6
#153-50-2 500 50 7
Top

Graduated Cylinders
#153-20 5 mL × .1 mL, TD, Glass
#153-18 10 mL × .1 mL, TC, Glass
#153-18-1 10 mL × .2 mL, TD, Glass
#153-09-3 10 mL × .2 mL, PMP, Nalgene®
#153-16 25 mL × .2 mL, TC, Glass
#153-09-4 25 mL × .5 mL, PMP, Nalgene®
#153-14 50 mL × 1 mL, TC, Glass
#153-09-5 50 mL × 1 mL, PMP, Nalgene®
#153-12 100 mL × 1 mL, TC, Glass
#153-09 250 mL × 2 mL, PMP, Nalgene®
#153-09-1 500 mL × 5 mL, PMP, Nalgene®
#153-09-2 1,000 mL × 10 mL, PMP, Nalgene®
Top

Pipettes
OFITE Pipettes are designated "TD" (To Deliver) and are calibrated by measuring the volume of distilled water that will flow from them by gravity alone. A small amount of liquid remains inside the tip and is not to be blown out.
#153-32 .1 mL × .01 mL, PYREX®
#153-34 1 mL × .01 mL, KIMAX
#153-34-1 1 mL × .01 mL, Plastic
#153-36 2 mL × .1 mL, KIMAX
#153-38 5 mL × .1 mL, KIMAX
#153-40 10 mL × .1 mL, KIMAX
#153-40-5 25 mL × .2 mL, Disposable
#153-10 Burette with Bottle and Bulb, Automatic, 10 mL
#144-90-05 Dropper Pipette, 2 mL, Nalgene®
#296-14 Eppendorf Variable Pipette, 10 - 100 µL × .1 µL
#296-15 Eppendorf Variable Pipette, 100 - 1,000 µL × 1 µL
#296-16 Pipette Tips, 1 - 200 µL Range
#296-17 Pipette Tips, 200 - 1,000 µL Range
#153-41 Pipette Aid (Safety Bulb)
#153-42 Pipette Filler, up to 10 mL, Fast Release
#153-43 Transfer Pipette, Not Graduated, 5 mL, Polyethylene
Top

Spatulas
#154-75 Brass Scoop, 4" Length
#154-63 Spatula, Micro-Spoon, 9" Flat Handle
#154-62 Spatula, Porcelain, 123 mm
#165-34 Spatula for 10 mL Retort, 2" × 7/8" Blade
#165-88 Spatula for 20 mL Retort, 5¼" × 11/16" Blade
#131-28 Spatula for 50 mL Retort and Ministill, 3.75" × 1-1/8"
#154-50 Spatula with Rounded-Tip Blade, 4" × ¾"
#154-60 Spatula with Rounded-Tip Blade, 6" × 1"
Top

Stirring Rods
#153-28 4", Polyethylene
#168-04 6", Glass
#168-05 10¾", Polyethylene
Top

Syrings
Needles must be destroyed before discarding by bending back or cutting off the needle tip. Syringes should be destroyed by breaking or shattering the barrel. Disposable syringes are plastic.
#153-60-11 1 mL, Disposable, Luer-Lok™ Tip
#153-299 2 mL, Glass-Tip
#153-600 3 mL, Disposable, Luer-Lok™ Tip
#153-611 3 mL, Disposable with 20 g Needle
#153-644 5 mL, Disposable, Luer-Lok™ Tip
#153-655 5 mL, Disposable with 20 g Needle
#153-29-11 5 mL, Glass-Tip
#153-622 10 mL, Luer-Lok™ Tip, Disposable
#153-633 10 mL, Disposable, with 20 g Needle
#153-29-22 10 mL, Glass-Tip
#168-022 10 mL, Veterinary
#153-666 20 mL, Disposable without Needle
#153-677 60 mL, Disposable without Needle
#165-644 BD Precision Glide Disposable Needle
#165-622 Filter for Syringe, 25 mm, 0.45 µm, PTFE
#151-20-22 Sample Injection Needle
Top

Test Tubes
#153-155 15 × 125 mm, ~16 mL, Glass
#144-90-06-11 18 × 150 mm, ~28 mL, Glass
#144-90-066 18 × 150 mm, ~29 mL, Glass with Rubber Stopper
#153-15-11 25 × 150 mm, Glass
#153-15-22 41 × 2.0 × 150 mm, Glass
#144-90-044 Rack for 8 Test Tubes, Poly
Top

Thermometers
#154-244 ASTM 90C, Glass, 0° - 30°C × 0.1°C
#154-266 ASTM 34F, Glass, 77° - 221°F × 0.5°F
#154-044 Digital, NIST Traceable, 8" Stem, -58° - 302°F (-50° - 150°C)
#154-055 Digital, 4" Probe, 14° - 392°F (-10° - 200°C)
#154-066 Traceable, Full-Scale, Battery-Powered, -58° - 500°F (-50° - 250°C)
#154-011 5" Stem, Metal Dial, 0° - 220°F (-10° - 100°C)
#154-100 5" Stem, Metal Dial, 50° - 500°F (0° - 250°C)
#154-155 4" Stem, Metal Dial, 50° - 500°F (0° - 250°C)
#154-200 8" Stem, Metal Dial, 50° - 500°F (0° - 250°C )
#154-233 General Purpose, Total Immersion, Mercury-Filled, Glass, 0° - 230°F
#154-222 Pocket, 5" Stem, 1" Dial, 0° - 220°F
#154-000 5" Stem, Metal Dial, 0° - 220°F
#147-033 Spirit-Filled (Non-Mercury), -20° - 105°C
#154-255 Type K, Digital, -50° - 1999°F (-50° - 1300°C)
Top

Titration Dishes
#153-266 Polyethylene
#153-26-1 Casserole, 140 mL Handle, Porcelain
Top

Wash Bottles
#153-31-1 8 oz (250 mL)
#153-31 16 oz (500 mL)
Top

For more information about this product or to request a quote, contact us.